ZD racing EX07 1/7 Simulation Supercar Flat Run Pull Remote Control Electric Handbrake 6S Brushless Model Car

dbx07 ex07 The original factory comes with a handbrake function, but it was not installed at the factory. Customers can install it themselves. If installation and debugging are required, they can leave a note or contact the customer for debugging!

EX07 is a 1/7 simulation violence supercar newly created by the ZDracing professional team. Based on Drift Master Brick Uncle Ken The 1965 Mustang, which underwent explosive modifications, is based on simulation design, lightweight structure, competition grade materials, and strong violence. The new car offers two versions: RTR and empty frame.

RTR power uses SURPASS four thousand two hundred and eighty-two 2000KV brushless cooling motor, 150A brushless electric adjustment, two 3S blocks 5000MAH lithium battery series connection, the original car configuration has a top speed of over 130km/h! The RTR is equipped with dual disc brakes and mechanical brakes, as well as simulated headlights and taillights. 2.4GHz four-way remote control, capable of independently switching between two modes of mechanical braking and 15 modes of front headlights, bringing a brand new fun of aggressive driving control.

The KIT version is more suitable for professional RC enthusiasts, with the freedom to mix and match power systems, bringing infinite possibilities. The original factory also provides a high-speed modification kit to meet the diverse needs of players, compared to ZDracing 1/8 platform, fully upgraded base plate, shock absorption and transmission system, stronger and more reliable. By adjusting the stroke of the shock absorber, it can adapt to various flat, grassy, and sandy areas.

基本参数 
产品名称 HYPERCAR
型    name EX-07
车型比例 1:7
驱动方式 4WD(四驱)
轴    distance 413mm
底盘高度 70mm
设计时速 130km/H
减速齿比 8.5:1

Appearance based on Drift Master Brick Uncle Ken Block’s modified 1965 845 horsepower Mustang prototype.

EX07 is a product created byZDracingA 1/7 simulation violence supercar newly created by a professional team. Based on Drift Master Brick Uncle Ken The 1965 Mustang, which underwent explosive modifications, is based on simulation design, lightweight structure, competition grade materials, and strong violence. The new car offers two versions: RTR and empty frame.

RTRPower usage SURPASS four thousand two hundred and eighty-two 2000KV brushless cooling motor, 150A brushless electric adjustment, two 3S blocks 5000MAH锂电串联，原车配置极速超过130km/h！RTR中差速配备双碟刹机械刹车，仿真的前大灯和尾灯。2.4Ghz四通遥控器，独立切换两档机械刹车和前大灯15种模式，带来全新的暴力驾控乐趣。

KITThe version is more suitable for professional RC enthusiasts, with the freedom to match the power system, bringing infinite possibilities. The original factory also provides a high-speed modification kit to meet the diverse needs of players, compared to ZDracing 1/8 platform, fully upgraded base plate, shock absorption and transmission system, stronger and more reliable. By adjusting the stroke of the shock absorber, it can adapt to various flat, grassy, and sandy areas.

EX07 The RTR vehicle weighs approximately 5.7KG and uses dual center axle support instead of traditional braces, saving more space and making the overall layout more centered with a lower center of gravity. The bottom plate is made of 4mm thick aluminum alloy 6061-T6, with CNC lightweight machining and anodizing hardening, achieving 1/5 of the strength of a remote-controlled car. The front and rear shock absorbers, steering cup, rear axle seat, motor seat, etc. are all made of aluminum alloy 6061 CNC machining. The width of the battery compartment is 50mm, and the length can be adjusted to accommodate up to 164mm. It is fixed with a magic strap and theoretically has no upper limit on thickness. The electric adjustment can accommodate the Haoying MAX6.

Compare ZDracing On the 1/8 platform, EX07 has undergone a comprehensive upgrade and strengthening. The transmission system uses larger module and larger size differential gears, CNC chrome molybdenum steel transmission teeth, imported alloy steel cup dog bones, and large capacity shock absorbers. The reinforcement of the metal bearing seat embedded in the gearbox injection molding completely solves the gear virtual position caused by deformation and wear of plastic after long-term use, and can more effectively avoid violent tooth sweeping.

RTR steering servo metal teeth with a torque of 15KG, middle differential dual disc brake mechanical brake, mechanical brake servo metal teeth with a torque of 9KG. four thousand two hundred and eighty-two KV2000 brushless motor with CNC aluminum alloy heat sink and two transparent high-speed fans.

The tire uses cloth clamped high-speed tires, which do not deform or throw cakes at high speeds. The size specification is an outer diameter of 109mm and a width of 51mm. The wheel frame has a hexagonal H17 and is suitable for 1/8 and 1/7 models on the general market.

To meet the diverse needs of players, the original car provides a high-speed modification kit, with a factory gear ratio of 1/8.6, gearbox gear of 43T/11T, intermediate reduction gear of 46T, and adjustable motor teeth of 18T-33T. The upgraded kit has a higher speed and a maximum gear ratio of 1:3.9. The RTR version is a center differential with a maximum actual configuration of 29T motor teeth and a maximum gear ratio of 1:6.2. In the later stage, upgraded motor seat accessories will be launched to adapt to 5085 and 1717 brushless motors.

The headlight has an outer diameter of Ø 26 (serial number 8602) and comes with a controller. The remote control can switch between 15 lighting modes and is suitable for mainstream remote controls such as Audi, TianDiFei, Fusi, and FUTABA.